Other Products

We are instrumental in offering a wide range of Buffer Resistor for Sugar Industry to our esteemed clients at the most competitive prices. Our range is ideal for long time use at the clients' end. Furthermore, quality controllers appointed by us carefully test these resistors before their final delivery. These are widely acclaimed by our clients. We offer the product at highly discounted prices in the industry.

Feature:

• High efficiency

• Durable standards

• Robust construction

• Rotor volts at standstill

• Rotor Current at full load

Tests:

• IS 2147 IS 12063 of 1987 for degree of protection for enclosure

• IPSS-1-10-002-82 with amendment no.1 and BS 587 for starting or speed control resistor

• Insulation resistance value measurement by using 500 V meager before and after dielectric test

• Resistance value measurement with ± 10 % tolerance

• H.V. Test of twice the rated voltage +1000 volts for voltage class below 660 volts

• Percentage (%) of slip required

• Starting Torque in percentage of full load Torque

Feature:

• Robust construction

• Compact design

• Durable

Product detail:

• Rated Voltage : For neutral grounding or earthing resistor rated voltage means line- to neutral voltage i.e. System Voltage divided by root 3 i.e. 1.732

• Rated Current : Means Initial current that will flow through resistor when it is cold. Normally Full load current value is same as Rated current

• Time Rating : It is length of time for which NGR must tolerate rated voltage

• Short Time Rating : Normally it is 10 sec. or 30 sec. or 60 sec. depending on design parameters of protection system

• Continuous Rating : It is normally 10 % of full load current for healthy system neutral grounding resistor to be designed for continuous rating of 5 % to 10 % of full load current

• Temperature Rise Allowed: Normally Temperature rise is restricted to 375 deg.c. above ambient temperature as per BS-587

• Cabling or termination : Suitable arrangement and clearance is provided for termination of cable, flats or bus duct as per requirement with removable gland plate

• Construction: NGR include resistor assembly, plus required insulators, internal connections and hardware etc

• Material of Resistance Element : We offer resistor elements made from any stainless steel or Cu-Ni or Ni-Cr or any other resistance material as per requirement. Normally formed stainless steel element are best and economical for NGRS

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

• Discharge cycle tests help the users to:
• Checking the initial battery performances.
• Avoid deterioration of battery systems due to early detection defective cells
• During emergencies guarantee smooth operation of back up systems
• Suitable for improving overall health and life of battery systems.

• Maximum voltage to minimum voltage of battery required to be discharged.
• Current steps required for each step of discharge voltage.
• The material of resistor element.
• Temperature rise allowed.

Buffer Resistor for application in cranes or other heavy machinery is offered. These are instrumental in starting and controlling the speed of AC or DC motors. Made up of stainless steel AISI-304, AISI-410 or AISI 430 or FeCrAl-AISI-406, these are non-corrosive & stable resistors. With rating varying from 2-10 minutes, it can be intermittent or continuous. The construct & configuration of buffer resistors are as per the IPSS-1-10-002-82 with amendment no.1 and BS 587 for starting/speed control resistor; IS 2147 & IS 12063 of 1987 for degree of protection for enclosure; IS 5 for paint shade and can meet other standards as required by client.

Features:

• Longer operational life
• Require less maintenance
• Highly demanded

Earthing Resistors that is manufactured and designed by us comply with the international quality standards. For that matter, our team make use of ultramodern machineries available at our base. Besides, our range has been priced very competitively and requires less maintenance.

Feature:

• Optimum performance

• High efficiency

• Sturdy design

Product detail:-

• Rated Current : Means Initial current that will flow through resistor when it is cold

• Time Rating : It is length of time for which NGR must tolerate rated voltage.

• Short Time Rating : Normally it is 10 sec. or 30 sec. or 60 sec. depending on design parameters of protection system

• Rated Voltage : For neutral grounding / earthing resistor rated voltage means line- to neutral voltage i.e. System Voltage divided by root 3 i.e. 1.732

• Material of Resistance Element : We offer resistor elements made from any stainless steel or FeCrAl or Cu-Ni or Ni-Cr or any other resistance material as per requirement. Normally formed stainless steel element are best and economical for NGRS

• Continuous Rating : It is normally 10 % of full load current for healthy system neutral grounding resistor to be designed for continuous rating of 5 % to 10 % of full load current (if required)

• Temperature Rise Allowed: Normally Temperature rise is restricted to 375 deg.c. above ambient temperature as per BS-587

• Construction: NGR include resistor assembly, plus required insulators, internal connections and hardware etc

• Cabling / Termination : Suitable arrangement and clearance is provided for termination of cable, flats or bus duct as per requirement with removable gland plate

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

• Galvanized M.S. washers will be used as the spacer between grid element and the same is insulated from grids by using mica washers.
• Temperature coefficient of resistance is 0.15% / c for AISI-410 0.094%/ c for AISI-304.
• The connection between adjacent grid is done by Arc Welding.
• Grids are formed of AISI - 304/AISI - 410 Stainless Steel materials.

• Grids are formed of AISI - 304/AISI - 410 Stainless Steel material
• Temperature coefficient of resistance is 0.15% / c for AISI-410 & 0.094%/ c for AISI-304.
• The connection between adjacent grid is done by Arc Welding.
• Galvanized M.S. washers will be used as the spacer between grid element and the same is insulated from grids by using mica washers.

• IPSS-1-10-002-82 with amendment no.1 and BS 587 for starting/speed control resistor.
• IS 2147 & IS 12063 of 1987 for the degree of protection for an enclosure.
• IS 5 for paint shade.
• Any other standard as required can also be followed.

• Suitable for printed circuit board
• Completely insulated resistor
• Products diversity

Feature:

• Smooth operations

• Low maintenance cost

• User friendly

• High efficiency

• Durability

• High operating reliability

• Simple maintenance and inspection

• Single pole and three pole

• On load and off load

• Motorized and manual mode of operation

Our esteemed clients are mesmerized by our offerings in the domain of manufacturing and wholesaling a qualitative array of Load Banks. This range is demanded for its smooth functioning, user friendliness and cost effectiveness. Moreover, these are manufactured under the supervision of our expert team in order to ensure a genuine range to the clients.

Feature:

• Optimum performance

• High efficiency

• Reliable

• Sturdy design

• Zinc plated hardware

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

Our esteemed clients are mesmerized by our offerings in the domain of manufacturing and wholesaling a qualitative array of Load Banks for Generator Testing. This range is demanded for its smooth functioning, user friendliness and cost effectiveness. Power to take control of all load testing requirements. Moreover, these are manufactured under the supervision of our expert team in order to ensure a genuine range to the clients.

Feature:

• Optimum performance

• High efficiency

• Reliable

• Sturdy design

• Load banks are compact units that are coupled to the output of your power generation system such as diesel generators, gas turbines or UPS and battery systems
• Load banks are dummy loads, designed to simulate the plant load and prove the design, performance and the capacity of the system, without interruption to the normal running of your plant
• Enclosed in the cabinet with Steps provided for loading, meters provided for each phase & terminations brought out on bakelite strip

Our esteemed clients are mesmerized by our offerings in the domain of manufacturing and wholesaling a qualitative array of Load Banks for UPS. This range is demanded for its smooth functioning, user friendliness and cost effectiveness. Moreover, these are manufactured under the supervision of our expert team in order to ensure a genuine range to the clients. The load bank is used in UPS system testing, testing.

Feature:

• Optimum performance

• High efficiency

• Reliable

• Sturdy design

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

We are engaged in offering best quality of Load Break Switch Panel. This Load Break Switch Panel is offered by us to customers at market leading prices. Further, the offered Load Break Switch Panel is extensively used in applications like transformer switching and in many others. One can avail these products from us in bulk.

Features:

• Compact design
• Cost effective prices
• Highly efficient

We are engaged in offering best quality of Load Break Switch Panel. This Load Break Switch Panel is offered by us to customers at market leading prices. Further, the offered Load Break Switch Panel is extensively used in applications like transformer switching and in many others. One can avail these products from us in bulk.

Features:

• Compact design
• Cost effective prices
• Highly efficient

Loading Resistor is designed for safe dissipation of maximum output of the power converter, which is in a full load test condition. A load resistor is necessary in testing power converter and other devices under a power load condition, to maintain accuracy and thermal stability in the entire test sequence. High wattage loading resistors offer best power supply solution for manufacturers involved in product life testing and functional testing. The loading resistors are large and bulky but advantageous as it can be easily mounted and wired in different combinations. These resistors should be carefully chosen depending on their non-inductive properties.

Features:

• Longer service life
• Maintenance free
• Competitive price

Known for its smooth functioning and wide application areas, our range of Neutral Grounding Resistors is extensively demanded and availed by our clients at the most reasonable and competitive prices. Besides, our expert team give special care to the quality aspects of our offered products.

Feature:

• Robust construction

• Compact design

• Durable

Product detail:

• Rated Voltage : For neutral grounding or earthing resistor rated voltage means line- to neutral voltage i.e. System Voltage divided by root 3 i.e. 1.732

• Rated Current : Means Initial current that will flow through resistor when it is cold. Normally Full load current value is same as Rated current

• Time Rating : It is length of time for which NGR must tolerate rated voltage

• Short Time Rating : Normally it is 10 sec. or 30 sec. or 60 sec. depending on design parameters of protection system

• Continuous Rating : It is normally 10 % of full load current for healthy system neutral grounding resistor to be designed for continuous rating of 5 % to 10 % of full load current

• Temperature Rise Allowed: Normally Temperature rise is restricted to 375 deg.c. above ambient temperature as per BS-587

• Cabling or termination : Suitable arrangement and clearance is provided for termination of cable, flats or bus duct as per requirement with removable gland plate

• Construction: NGR include resistor assembly, plus required insulators, internal connections and hardware etc

• Material of Resistance Element : We offer resistor elements made from any stainless steel or Cu-Ni or Ni-Cr or any other resistance material as per requirement. Normally formed stainless steel element are best and economical for NGRS

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

• Aluminum enclosure instead of MS
• Cable gland
• Earth fault leakage Relay
• Hot dip Galvanized enclosures
• Neutral Grounding Transformer/Excitation Transformer
• Potential transformers
• Safety Screen for enclosures
• Stainless steel hardware
• Standoff insulators
• Supporting Pedestal structures
• Termination kit

We are engaged in manufacturing, supplying and exporting Resistors for Generators. For that matter, our team make use of ultramodern machinery available at our base. Besides, our range has been priced very competitively and requires less maintenance.

Feature:

• Optimum performance

• High efficiency

• Sturdy design

Product detail:-

• Rated Current : Means Initial current that will flow through resistor when it is cold

• Time Rating : It is length of time for which NGR must tolerate rated voltage.

• Short Time Rating : Normally it is 10 sec. or 30 sec. or 60 sec. depending on design parameters of protection system

• Rated Voltage : For neutral grounding / earthing resistor rated voltage means line- to neutral voltage i.e. System Voltage divided by root 3 i.e. 1.732

• Material of Resistance Element : We offer resistor elements made from any stainless steel or FeCrAl or Cu-Ni or Ni-Cr or any other resistance material as per requirement. Normally formed stainless steel element are best and economical for NGRS

• Continuous Rating : It is normally 10 % of full load current for healthy system neutral grounding resistor to be designed for continuous rating of 5 % to 10 % of full load current (if required)

• Temperature Rise Allowed: Normally Temperature rise is restricted to 375 deg.c. above ambient temperature as per BS-587

• Construction: NGR include resistor assembly, plus required insulators, internal connections and hardware etc

• Cabling / Termination : Suitable arrangement and clearance is provided for termination of cable, flats or bus duct as per requirement with removable gland plate

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

• Optimum performance
• High efficiency
• Sturdy design

• Rated Current : Means Initial current that will flow through resistor when it is cold
• Time Rating : It is length of time for which NGR must tolerate rated voltage.
• Short Time Rating : Normally it is 10 sec. or 30 sec. or 60 sec. depending on design parameters of protection system
• Rated Voltage : For neutral grounding / earthing resistor rated voltage means line- to neutral voltage i.e. System Voltage divided by root 3 i.e. 1.732
• Material of Resistance Element : We offer resistor elements made from any stainless steel or FeCrAl or Cu-Ni or Ni-Cr or any other resistance material as per requirement. Normally formed stainless steel element are best and economical for NGRS
• Continuous Rating : It is normally 10 % of full load current for healthy system neutral grounding resistor to be designed for continuous rating of 5 % to 10 % of full load current (if required)
• Temperature Rise Allowed: Normally Temperature rise is restricted to 375 deg.c. above ambient temperature as per BS-587
• Construction: NGR include resistor assembly, plus required insulators, internal connections and hardware etc
• Cabling / Termination : Suitable arrangement and clearance is provided for termination of cable, flats or bus duct as per requirement with removable gland plate

Feature:

• Optimum performance

• High efficiency

• Sturdy design

Product detail:

• Rated Current : Means Initial current that will flow through resistor when it is cold

• Time Rating : It is length of time for which NGR must tolerate rated voltage.

• Short Time Rating : Normally it is 10 sec. or 30 sec. or 60 sec. depending on design parameters of protection system

• Rated Voltage : For neutral grounding / earthing resistor rated voltage means line- to neutral voltage i.e. System Voltage divided by root 3 i.e. 1.732

• Material of Resistance Element : We offer resistor elements made from any stainless steel or FeCrAl or Cu-Ni or Ni-Cr or any other resistance material as per requirement. Normally formed stainless steel element are best and economical for NGRS

• Continuous Rating : It is normally 10 % of full load current for healthy system neutral grounding resistor to be designed for continuous rating of 5 % to 10 % of full load current (if required)

• Temperature Rise Allowed: Normally Temperature rise is restricted to 375 deg.c. above ambient temperature as per BS-587

• Construction: NGR include resistor assembly, plus required insulators, internal connections and hardware etc

• Cabling / Termination : Suitable arrangement and clearance is provided for termination of cable, flats or bus duct as per requirement with removable gland plate

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

We are counted among the leading manufacturers and wholesalers of an exclusive range of Speed Control Resistor for AC and DC Drives. This range manufactured by our team has been able to meet the expectations of our clients and followed demands for our range is very high. Addition to that, our range is quality approved and has high efficiency as well. our range is quality approved and has high efficiency as well

Feature:

• Compact design

• Reliable performance

• Competitively priced

• Rotor volts at standstill

• Rotor Current at full load

• IPSS-1-10-002-82 with amendment no.1 and BS 587 for starting, speed control resistor

• IS 2147 IS 12063 of 1987 for degree of protection for enclosure

• IS 5 for paint shade

Tests:

• Routine Tests: - Following tests will be conducted

• Visual and dimensional

• Resistance value measurement with ± 10 % tolerance

• H.V. Test of twice the rated voltage +1000 volts for voltage class below 660 volts

• Insulation resistance value measurement by using 500 V meager

• Percentage (%) of slip required

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

Supported by our highly qualified and skilled professionals, we have been able to offer our esteemed clients a quality approved range of Electrical Isolators. We execute our manufacturing process by following organization set quality parameters also abide by fair and transparent business policies. Because of this, our products meet with exact demands of our clients.

Feature:

• Smooth operations

• Low maintenance cost

• User friendly

• High efficiency

• Durability

• Single pole and three pole

• On load and off load

• Motorized and manual mode of operation

• Can be mounted on walls, structures or in switchboards

• High operating reliability

• Simple maintenance and inspection.

• Compact In Dimensions
• Sturdy Design of current carrying parts
• Availability of link drive/Aux
• Switch for switchboard operation/electrical indications & interlock purpose Respectively. Insulators have high Anti-tracking qualities

Our esteemed clients are mesmerized by our offerings in the domain of manufacturing and wholesaling a qualitative array of Load Banks for UPS. This range is demanded for its smooth functioning, user friendliness and cost effectiveness. Moreover, these are manufactured under the supervision of our expert team in order to ensure a genuine range to the clients. The load bank is used in UPS system testing, testing.

Feature:

• Optimum performance

• High efficiency

• Reliable

• Sturdy design

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

Owing to our long time involvement in the domain of manufacturing and supplying a wide range of Battery Discharge Resistor that is of excellent quality. Respected clients can avail our manufactured resistors as per their preferences and requirements by spending only a reasonable amount.

Feature:

• Quality approved

• Robust size

• Durable standard

• Avoid deterioration of battery system due to early detection defective cells

• Check initial battery performance against manufactures specifications

• Improve overall health and life of battery system

• Maximum voltage to minimum voltage of battery required to be discharged

• Guarantee smooth operation of back up system during emergencies

• Material of resistor element

• Temperature rise allowed

• IPSS-1-10-002-82 with amendment no.1 and BS 587 for starting/speed control resistor
• IS 2147 & IS 12063 of 1987 for the degree of protection for an enclosure
• IS 5 for paint shade
• Any other standard as required can also be followed

• Insulation resistance value measurement by using 500V megger before and after the dielectric test
• Resistance value measurement with ± 10 % tolerance
• H.V. Test of twice the rated voltage +1000 volts for voltage class below 660 volts

• Rotor volts at the standstill
• Rotor Current at full load
• Duty rating (Time on/off No. of Cycles)
• Starting Torque in the percentage of full load Torque
• The material of Resistor
• No. of steps/sections and its resistance values per phase
• Type of enclosure (Protection Class as per IS-12063)
• Temperature rise allowed
• Whether terminals should be brought down at one place
• Details of atmospheric conditions at the site

• Rotor volts at the standstill
• Rotor Current at full load
• Percentage (%) of slip required

Precisely manufactured in accordance with the organizational guidelines, our range of Starting Resistor is largely demanded by our clients. Available as per their requirements, our range also meets international quality standards.

Product Features:

• Highly reliable

• Durable standards

• Robust construction

• Rotor Current at full load

• Technology: Thick Film

• Operating Temperature: C

• Rotor volts at standstill

• Duty rating

• Starting Torque in percentage of full load torque

• Type of enclosure (Protection Class as per IS-12063)

• Temperature rise allowed

• No. of steps, sections and its resistance values per phase

• Whether terminals should be brought down at one place

• Details of atmospheric conditions at site

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.

Precisely manufactured in accordance with the organizational guidelines, our range of Starting Resistor for Slippering Motors is largely demanded by our clients. Available as per their requirements, our range also meets international quality standards. In addition to this, clients can avail the offered range from us at cost-effective prices.

Furthermore, our products are known for the below mentioned feature:

• Highly reliable

• Durable standards

• Robust construction

• Rotor Current at full load

• Technology: Thick Film

• Operating Temperature: C

• Rotor volts at standstill

• Duty rating

• Starting Torque in percentage of full load Torque

Material of Resistor

• Type of enclosure (Protection Class as per IS-12063)

• Temperature rise allowed

• No. of steps, sections and its resistance values per phase

• Whether terminals should be brought down at one place

• Details of atmospheric conditions at site

We deals in Gulf Countries like Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates and Middle East Countrie.